weBoost Connect 4G Cellular Signal Booster Kit

by weBoost
Part # 470103
DISCONTINUED

Product Description

weBoost Connect 4G Cellular Signal Booster Kit

Stay connected whether you’re accessing email, making a call or streaming videos. Connect 4G gives you the reliable signal you need for uninterrupted connectivity throughout your home or workplace.

Your cellular connection is an essential part of your life. Stop wasting time waiting for videos to buffer or downloads to complete. The Connect 4G can significantly improve your cell signal on all cellular-connected devices and works especially well in modern, energy efficient buildings known to contain materials that weaken cell signals. Connect 4G also features dynamic, self-adjusting gain controls that automatically customize the gain level on each frequency band as conditions require.

What Gets Boosted / Amplified?

  • Voice Calls = Yes
  • 2G / 3G Data = Yes
  • 4G Data = Yes

How The Kit Works

The Amplifier receives the signal coming from the cell tower, amplifies it, and then wirelessly transmits the more powerful signal to your cellular device.  It also receives the signal coming from your device, amplifies it, and transmits it back to the cell tower.  It essentially acts as a 2-way hearing aid when the cellular tower and wireless device are unable to communicate effectively.

Coverage Area

  • Intended Use: Designed for signal amplification in a Small Building
  • Typical Coverage Range: Depends on initial signal strength , obstructions, composition of walls, placement of equipment, etc.  See table below for coverage estimates
  • Expandability: Low - No more than 1 additional inside antenna should be added to enlarge the coverage area of this kit

Features and Benefits

  • Boost 4G, 3G, talk & text, reduce dropped calls, improve voice quality, extend service range, and increase data rates on all phones with all carriers
  • For buildings: home, office, cottage, apartment or SOHO
  • Easy to install, complete DIY (do-it-yourself) kit
  • Effective in amplifying the signal for multiple cell phones and data cards simultaneously
  • There is no physical connection to the phone or data card, so you can move freely during a call or web surfing session
  • Extends the life of your cell phone battery - phones vary their power output based on the strength of the signal (the greater the signal, the less power it uses) so a phone being used with a booster will consume less power

Included With This Kit

  • Drive Connect 4G Signal Booster
  • Outside Wide Band Directional Antenna - 314475
  • Inside Panel Antenna - 301155
  • 2 x 30' RG6 Coax Cable - 950630
  • AC Power Supply - 859948

Customizations

The components used for this bundle are suitable for most typical building installations. However, particular needs do vary and additional equipment might be needed.

  • Click here for additional antennas, cables, adapters, etc.
  • If you believe that your installation requires additional equipment, equipment other than the bundled components provided with this kit, or are unsure of your requirements, please fill out and submit this questionaire or call us for assistance. (310) 220-2250

Documentation

Installations

  • weBoost Amplifier Systems can be self installed or we can arrange a professional installation for you.  Click here for more details.

 

 


Specifications

Amplifier Specifications
  • Frequency Range: Band 17 (700 MHz), Band 13 (700 MHz), Band 5 (850 MHz), Band 4 (1700/2100 MHz), Band 25/2 (1900 MHz)
  • Max Gain: 65 dB
  • 110-240 V AC, 50-60 Hz, 8 W
  • Connectors: F-Female
  • Impedance: 75 ohms
  • Dimensions: 6.3 x 4.2 x 1.4 in
  • Weight: 0.41 lbs
Inside Panel Antenna Specifications
  • Part# 311155
  • Built-in ground plane
  • Mounting hardware included
  • Dual Band Frequency Range: 800-960 MHz / 1710-2500 MHz
  • Gain: 7 dBi / 10 dBi
  • Impedance: 75 ohms
  • Connector: F-Female
  • Dimensions: 8.27 x 7.09 x 1.73 inches / 21 x 18 x 4.39 cm
  • Weight: 1.32 lbs / 0.6 kg
Outside Wide Band Directional Antenna Specifications
  • Part# 314475
  • Includes L- Bracket and Bolt Assembly for mounting to side of building or on pole with 1.25 inch to 2 inch diameter
  • Dual Band Frequency Range: 806-894 / 1850-1990 MHz
  • Impedance: 75 ohms
  • Antenna Gain: 5.12 dBi / 6.12 dBi
  • Max Power: 25 watts
  • Polarization: Vertical
  • Connector: F-Female
  • Built in 14" of cable
  • Material: Fiberglass
  • Length: 18 inches / 45.7 cm

FCC Mandatory Registration
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
  • You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
  • You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
  • WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
  • Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.
Click here for registration links to the five largest carriers in the country.